NLCLZ type drum gear coupling plays a protective role:

NLCLZ type drum gear coupling in fact, in addition to its common coupling transmission function, but also have a role is to protect the mechanical equipment from damage, so this is why the coupling is classified as vulnerable parts of general parts. Drum gear coupling wear is very normal, is due to the machining accuracy, working conditions, the existence of a series of impact, such as coupling transmission parts of the working condition is bad. In the process of its work, but also to carry out the wrong compensation. Therefore, it is easy to wear out when the compensation amount is large, the speed is high and the working condition is complex.

Components of NLCLZ type drum gear coupling:

The NLCLZ type drum gear coupling is a mechanical part used to connect two shafts in different mechanical equipment so as to allow the two shafts to rotate together to transfer torque. In high speed and heavy load power transmission, some couplings also play the role of cushioning, damping and improving the dynamic performance of shafting. The coupling consists of two halves connected with the drive shaft and the driven shaft respectively. The general engine is connected with the working machine mostly by means of coupling. In the process of selecting the coupling transmission parts, the appropriate type should first be selected according to the working requirements, and then the torque and speed should be calculated according to the diameter of the shaft, and then the applicable model should be found, and the key parts should be checked in the back.

To sum up:

The NLCLZ type drum gear coupling is a rigid part, so the coupling transmission has no cushioning or vibration absorption capacity. But from the use of the situation, the groove and shoulder of the two halves of the coupling wear seriously, and with the increase of clearance vibration. Shock and noise also increased dramatically. This is a great harm to the reducer, motor and so on. So when the coupling wear to the corresponding degree need to be replaced. This is also for good equipment, avoid loss. It can compensate the axial, radial and angular deviation caused by manufacturing error, installation error, bearing deformation and temperature change between the driver and the slave. Coupling transmission part is flexible coupling of metal elastic components, which relies on metal coupling diaphragm to connect the main and transfer torque from the motor, has the advantages of elastic vibration reduction, no noise, no lubrication, is the ideal product to replace gear coupling and general coupling.