The ten-byte cardan axis is a common kind of cardan axis, and its main component is ten bytes. The cardan axis connects one axis to the horizontal axis of the decabyte so that it can move up and down, and the other axis is connected to the vertical axis so that it can move left and right. Cardan joint and cardan axis although they look similar in name, but they are two different things, and there is a big difference.

How to realize the synchronous operation of cardan shaft input and output?

The main difference between the universal joint and the universal shaft is the use and structural performance of the two aspects, but in principle the universal joint and the universal shaft are similar. If you want to make the input and output of the cardan shaft run simultaneously, and there is no speed fluctuation, the following work should be done:

1, in the process of installing the cardon shaft, it is necessary to form a Z shape and a W shape between the two ends of the fork head and the intermediate shaft.

2. The Angle between the middle line of the plug and the axis of the intermediate shaft should also be equal.

In principle, it can be used as an active or a slave, and there is no problem. However, in actual work, it is also necessary to consider whether the design requirements of the load transmission system are met, if they are not met, it is possible that the cardan shaft will fail during use.