Each thing has its own service life, but some are long and some are short. Regardless of the type specifications of the cardan shaft, after long-term application, it is inevitable that a series of ups and downs will occur. If nothing is done about this matter, it will certainly cause some inconvenience to the production and manufacturing work and harm the production and manufacturing. Therefore, in order to better ensure that the cardan shaft can operate normally in the whole process of application, and can reasonably increase its use period, we need to carry out some maintenance work on the cardan shaft.

The coupling will give us to share how to do the maintenance of the cardan shaft from four processes.

1, the application of cardan shaft, the first to pay attention to the slow speed, only gradually accelerate the whole process of application is more in line with the mechanical application, so as to reduce the mechanical machinery and equipment need not wear out.

2. Check the balance of universal coupling. Because the equalizing weld is one of the key reasons for the smooth cardan axis equalization, it is a very important step. When we carry out critical maintenance, we must be careful about the associated problems of the original installation.

3, the working condition of the cardan shaft must be checked every day, so as to ensure that all the cardan shaft works normally.

4. Add lubricating grease. In general, in the summer, lithium grease is injected, and lithium grease is also introduced in the winter. But the difference is that the number of lithium grease added in these two seasons is not the same.

If you want the machinery to operate smoothly and not harm the production and manufacturing work, in addition to the maintenance of machinery and equipment, the maintenance of the cardan shaft can not be less. Keep these four tips in mind to give your machine two more years of operation.